How to Install Brisa Retractable Screen Door | An Installation Guideline For You

So, you’ve decided to bring a breath of fresh air into your home with a Brisa retractable screen door. Great choice! Installing any home improvement item can be daunting, especially if you’re not a seasoned DIY-er. 

However, you can easily install a Brisa retractable screen door yourself. Yes, you read that right! With the right materials, tools, and a bit of patience, you’ll have it up and running smoothly. 

Now, if you’re wondering how exactly you’re going to pull this off, don’t click away just yet. In the following sections, we’re going to walk you through the entire process, offering tips and insights that will make this a breeze. So, stick around, and by the end of this article, you’ll be a Brisa screen door installation pro!

Challenges You May Face While Installing a Brisa Retractable Screen Door 

While installing a Brisa retractable screen door is relatively straightforward, there are a few challenges that you may encounter.

• Measuring accurately: It’s important to measure your door opening carefully before ordering your Brisa retractable screen door. If you don’t measure accurately, the door may not fit properly, which could lead to problems with installation or operation.
• Mounting the tracks: The Brisa retractable screen door tracks need to be mounted securely to the door frame and sill. This can be tricky, especially if you’re not familiar with carpentry.
• Adjusting the screen: Once the door is installed, you may need to adjust the screen tension to ensure that it opens and closes smoothly. This can be a bit tricky to get right, but it’s important to take the time to do it properly.

Necessary Things You Will Require

First things first, gather your materials and tools. It’s like preparing your ingredients before cooking up a storm in the kitchen. Here’s what you’ll need

• Brisa Retractable Screen Door Kit – Make sure you have the complete kit, including the screen cassette, tracks, screen material, handle, and all necessary screws and anchors.
• Measuring Tape – Precision is the name of the game here.
• Pencil and Marking Tool – To mark the installation points accurately.
• Level – To ensure your screen door is perfectly straight.
• Drill and Drill Bits – You’ll need these to make holes for screws and anchors.
• Screwdriver – For securing screws and adjusting tension.

Now that you’ve got your toolkit ready, it’s time to get your hands dirty, figuratively speaking.

Install Procedure for Installing Brisa Retractable Screen Door

Here we have shared the procedure for different types of doors, s single doors, double doors, and slide doors. So, find out which one you are willing to do and follow the steps as instructed.

Installing a Brisa Retractable Screen on a Single Door

Here are the steps you will require –

Step 1 – Prepare the Door Frame

Make sure the door frame is clean and free of debris. If the door frame is painted, you may need to sand it lightly to create a smooth surface for the screen to slide on.

Step 2 – Measure and Mark The Mounting Locations

The mounting locations for the screen housing and track should be 4 inches from the sides and 10 inches from the top of the door frame. Use a level to ensure that the mounting locations are level.

Step 3 – Drill Pilot Holes At The Marked Locations. 

Be careful not to drill too deeply, as you don’t want to damage the door frame.

Step 4 – Secure the Screen Housing And Track To The Door Frame. 

Use screws to secure the screen housing and track to the door frame at the pilot holes.

Step 5 – Attach the Screen To The Track

Thread the screen through the track and secure it with the latch hook.

NOTE – If the width of the door is less than 32” then two cuts are required.

Installing a Brisa Retractable Screen on a Double Door

To install a Brisa retractable screen on a double door, follow these steps:

• Step 1 – Follow steps 1-3 above for preparing the door frame and measuring and marking the mounting locations.
• Step 2 – Install the screen housing and track on one side of the door frame.
• Step 3 – Install the latch hook on the opposite side of the door frame.
• Step 4 – Attach the screen to the track on both sides of the door frame.
• Step 5 – Adjust the latch hook so that it aligns with the screen housing on both sides of the door frame.

NOTE – If the width of the door is less than 68” then two cuts are required.

Installing a Brisa Retractable Screen on a Sliding Door

To install a Brisa retractable screen on a sliding door, follow these steps:

• Step 1 – Follow steps 1-3 above for preparing the door frame and measuring and marking the mounting locations.
• Step 2 – Install the screen housing and track on the inside of the door frame.
• Step 3 – Attach the screen to the track.
• Step 4 – Adjust the latch hook so that it aligns with the screen housing.

With a little care and attention, you can easily install a Brisa retractable screen on your door. This will give you the convenience of enjoying fresh air and sunlight without having to worry about bugs.

Tips for Installing a Brisa Retractable Screen

During your work, you may encounter issues or make mistakes that lead to unwanted consequences. Keep the following tips in mind to complete your job perfectly.

• Make sure that the door frame is level and plumb. This will help to ensure that the screen slides smoothly.

• Use screws that are the correct length for the door frame material.
• Be careful not to overtighten the screws, as this can damage the door frame or the screen.
• Test the screen to make sure that it slides smoothly and that the latch hook engages properly.

Bonus Tips – Different Sized Brisa Retractable Screen for Different Types of Doors with Color Availability and Model Number

Door Height	Colors Available	Door Type	Fits Door Width	Screen Size	Model
6’6″ (78″)	White, Bronze, Sandstone	Single	32″ to 72″	Short	BRSHWE, BRSHBE, BRSHWE-BL, BRSHBE-BL
6’6″ (78″)	White, Bronze, Sandstone	Double	68″ to 72″	Standard	BRSTWE, BRSTBE, BRSTWE-BL, BRSTBE-BL
6’8″ (80″)	White, Bronze, Sandstone	Single	32″ to 72″	Short	BRSHWE-80, BRSHBE-80, BRSHWE-80-BL, BRSHBE-80-BL
6’8″ (80″)	White, Bronze, Sandstone	Double	68″ to 72″	Standard	BRSTWE-80, BRSTBE-80, BRSTWE-80-BL, BRSTBE-80-BL
8’0″ (96″)	White, Bronze, Sandstone	Single	32″ to 72″	Short	BRSHWE-96, BRSHBE-96, BRSHWE-96-BL, BRSHBE-96-BL
8’0″ (96″)	White, Bronze, Sandstone	Double	68″ to 72″	Standard	BRSTWE-96, BRSTBE-96, BRSTWE-96-BL, BRSTBE-96-BL
6’8”(80”)	White	Slide	32” to 36”	Standard	BRSLWE

People Also Ask – PAA

Can Brisa Retractable Screen Doors be installed on stucco homes without a wood door frame?

Unfortunately, no, it can’t be installed on stucco homes. For proper attachment, you will require a door frame, door trim, etc. 

Is maintenance required on my Brisa Retractable Screen Door?

Yes, regular maintenance is recommended to keep your Brisa Retractable Screen Door in excellent condition. This will ensure smooth operation and extend the lifespan of the door.

Why does my retractable screen door retract slowly?

Then there are issues with the track. Dust and debris accumulation, nicks or bends in the track, or issues with the weatherstrip can cause this issue to your retractable screen door. 

What if there are gaps above the guide rail or in the corners?

If you find gaps above the guide rail or the corner then you will need to fill the gaps. For filling, you can use a caulk, take a caulk gun, and fill the gaps. It will solve the issue that you are having. 

How to choose the right BRISA Retractable Screen Door?

Measure your door frame, consider door type, select the right height and color, choose the screen size, explore additional features, decide on the installation method, read reviews, consult manufacturer guidelines, and seek professional advice if needed.

Can I put a retractable screen door on any door?

Yes, a retractable screen door can be used on any kind of door. According to Brisa, such kinds of doors can fit in-out swing doors, single/double doors, slider doors, French doors, etc.

Endnotes

Congratulations, you’ve reached the end of our comprehensive guide on how to install a Brisa retractable screen door. By now, you should have the confidence and knowledge to tackle this DIY project with ease. Remember, it’s all about measuring accurately, following the steps diligently, and taking your time to ensure a flawless installation. So, go ahead, embark on your home improvement journey, and may your Brisa screen door installation be a breeze. Thanks for reading, and best wishes for your project!