How to Install Hinge Pin Door Stop? Just 4 Steps

A doorstop is a tool used for holding a door open or close, or to put a stop to a door from opening too widely that can possibly damage any surroundings. It can be pretty essential for those doors that are very flexible in terms of movement or that face outer impacts or forces on and off. You can find several doorstops available out there including wall mount, floor mount, door mount, hinge mount, roller stops, etc. Among them hinge mount is mention-worthy.

In this post, we’ll present the method of installing a hinge mount or hinge pin doorstop. So, if you’re already thinking about it then you’ve come to the exact place. Just take a few minutes and read the entire post.

How Do You Install a Hinge Pin Door Stop?

Hinge Pin doorstops are made for installation on a door’s hinge. Let us assure you that the entire procedure is pretty simple and you don’t even have to drill any additional holes for this. That’s why numerous people prefer to use this doorstop with their door. These doorstops are especially perfect for bathrooms where there’s a risk that the door may bang on the toilet or other accessories.

To install the hinge pin doorstop, you’ll need a hammer and a slotted screwdriver or nail. Now follow these simple steps to install it – 

Step 1: Grab the hammer with one hand and the slotted screwdriver with the other hand. 

Step 2: Then remove any one of the hinge pins according to your preference with those tools. Put the screwdriver at the upper end of the pin and bang it with the hammer in order to remove. 

If the screwdriver fails to do that, use a nail. In its case, place it at the lower end of the pin.

Step 3: Now place the doorstop on the hinge and insert the hinge pin into the hinge through the doorstop’s plastic bushing. 

Step 4:  Finally, use the adjustable to adjust the doorstop as you prefer.  

That’s it!

FAQs (Frequently Asked Questions and Answers)

In what direction do I put a hinge pin doorstop?

As you may know, you need to install the hinge pin doorstop on the hinge, at the end where the hinge pin can be removed, which is basically the upper end. But the direction will depend on the side of the door that you want to prevent. If you want to prevent the door from opening widely in one direction, you’ll have to put the doorstop on the opposite side. And if it’s for both directions, you’ve to put doorstops on both sides. 

Do hinge pin doorstops stop working well?

Yes, sometimes they stop working well, especially when the hinge pin doorstops are placed inappropriately or the doorstops are actually inadequate according to the size or weight of the door. For instance, if the doorstop is made for lightweight doors but you install it for a heavy door, it can’t bear the pressure and will definitely stop working well at a point. 

Where is the best place to put a door hinge?

It’s always better to put the top door hinge five inches from the door’s upper end and the bottom door hinge ten inches from the door’s lower end. 

Conclusion

That’s all about installing a hinge pin doorstop. As the procedure is so convenient, we hope that you don’t have to face any difficulties while applying it. Just make sure you don’t damage any portion of the door, hinge, or wall while removing the hinge pin. Let us know if this post helps you to complete the installation successfully.